Feel free to get in touch if you want to collaborate with us. Drop us a line via email or Instagram.

ColorGard® for Standing seams

The ColorGard® system is compatible with all standing seam metal roof profiles. Perfect color-finish-matching guaranteed because it is the same material as the roof! Our metal roof snow guards can be easily installed any time of the year. Retrofit ColorGard® to an existing roof or incorporate it in the new roof design.

ColorGard® for Standing seamscover
Steel roofing systems

ColorGard® for Standing seams

The ColorGard® system is compatible with all standing seam metal roof profiles. Perfect color-finish-matching guaranteed because it is the same material as the roof! Our metal roof snow guards can be easily installed any time of the year. Retrofit ColorGard® to an existing roof or incorporate it in the new roof design.

System components

  • Punched Crossmember

    Punched Crossmember

    Slotted every 4” (10.2 cm) on center for seams spaced accordingly (divisible by 4”).
    Not recommended with exposed-fastened profiles.
    Installs in 7' 8" lengths.

    page cover
  • Unpunched Crossmember

    Unpunched Crossmember

    Accommodates any seam spacing. Use with all snow-compatible clamps or brackets.
    Installs in 7' 8" lengths.

    page cover
  • Splice (Included w/ Crossmembers)

    Splice (Included w/ Crossmembers)

    Joins adjacent ColorGard crossmembers to maintain structural continuity. Splice automatically provides for thermal linear expansion and contraction of the ColorGard assembly.

    page cover
  • VersaClip™ (Purchased Separately)

    VersaClip™ (Purchased Separately)

    Connects crossmember to any S-5! standard clamps, the Corrubracket and VersaBrackets (an M8 bolt and nut are required when using VersaBracket).

    page cover
  • SnoClip™

    SnoClip™

    Retards migration of snow and ice beneath crossmembers. Optional with user discretion but recommended on seam heights of 2” and greater. SnoClip is assembled to crossmember during installation.

    page cover
  • SnapClip™

    SnapClip™

    Performs the same function as SnoClip, but has two additional features. SnapClip may be retrofitted later to an existing assembly. It also screw-fastens to the crossmember, preventing its lateral migration.

    page cover
  • Compatible S-5! Clamp or Bracket

    Compatible S-5! Clamp or Bracket

    See individual pages to select the best attachment solution for your metal roof profile.

    page cover
  • Color Strip (Not Included)

    Color Strip (Not Included)

    This 2” wide strips made from roofing panel material and inserted into crossmember element of the system.

    page cover

features

Advantages of ColorGard® snow bar

Maintenance-free

100% aluminum and stainless steel components

Easy installation

Prefabricated components – provide simple, easy installation - even for DIY

Perfect color matching

Perfect color-finish-matching for the life of the roof, utilizing a strip of actual roof material

Basic nuances and common details

  • Installation

    • Single skin application
    • Recommended that this always be applied over solid substrate
    • Recommended that this be applied over waterproof membrane
    • Clips at maximum 2’ centres - 2 fasteners per clip
    • Mechanical and Hand Seamer Required
  • Applications

    It can be used on any cladding application from walls, roofs, accent touches and interior details. The most significant benefit is the ability to accommodate low sloped roofs.

How properly select the components to use ColorGard® system

compare
compare

SnoClip™

SnapClip™

SnoClip is for use on new installations. This aluminum component retards the migration of snow and ice beneath the ColorGard® systems. It has a special integrated rubber “foot” to prevent abrasion of the panel’s finish. SnoClip slides onto the back of the crossmember or rod and extends down to the flat of the roofing panel.

SnapClip is designed for retrofit projects. It can be retrofitted to existing ColorGard assemblies. Snap the appropriate SnapClip lock onto the ColorGard crossmember. Secure the SnapClip directly into the ColorGard crossmember by driving a screw through the pre-punched holes of the SnapClip and into the channel of the crossmember.

Designed for Seam heights of 1” to 1-1/2”

  • Lock 1 — 1-3/8” to 1-1/2”
  • Lock 2 — 1” to 1-3/8”
  • Lock 3 — N/A

Designed for Seam heights of 1-1/2” to 3-1/4”

  • Lock 1 — 2-7/8” to 3-1/4”
  • Lock 2 — 2-1/2” to 2-7/8”
  • Lock 2 — 1-1/2” to 2-1/2”

Features

  1. No exposed fasteners
  2. Ease of installation
  3. Wide range of colours

Features

  1. No exposed fasteners
  2. Ease of installation
  3. Wide range of colours
  4. Variable width

get in touch

We offer various types of S-5!® Steel roofing systems, please contact us for details and pricing

Get a quote

If you want to contact with us, place an order or have any questions, please fill out this form.

I agree to the processing of my personal data.